Reflection Control® Acrylite®

Highly reflective surfaces can act like a mirror, causing glare and distracting viewers from the artwork you want to display.  Reflection Control® Acrylite® acrylic sheet is designed to minimize reflection and show the art from almost any angle.




  • Available in 2.3mm and 3.0mm thickness depending on sheet size
  • Lightweight, durable acrylic
  • Water-white colorless edge
  • Provides glare-free enjoyment without UV protection
  • Any framing project that would benefit from lightweight acrylic with glare reduction

Handling

  • Cotton gloves should be worn to minimize fingerprints and other particles.
  • ACRYLITE sheets are covered with a protective white poly film on each surface. This film prevents scratching during handling and cutting and should be left in place on the sheet as long as possible. To remove the film, start at one corner or side and roll the film on to a scrap cardboard core or on to itself. The film should never be exposed to excessive sunlight or outdoor conditions for extended periods of time.

Cleaning

  • Use an acrylic cleaner and a clean damp cleaning cloth. Apply only light pressure, rinse with clean water, or a cleaner designed specifically for acrylic, and dry by blotting with a clean, damp cloth or chamois.
  • Do not use dry or gritty cloths, they may cause surface scratches and create a static electric charge on the surface.
  • Do not use glass cleaning sprays, kitchen scouring compounds or solvents such as acetone, gasoline, or lacquer to clean acrylic.
  • Spray an ammonia-free cleaner onto the cloth and wipe the acrylic.
  • Conservation Clear ACRYLITE acrylic sheet with Scratch Resistance can be cleaned with a common household glass cleaner.

Cutting

  • Place ACRYLITE sheet on a clean, dust free work area.
  • Cover the work table with a soft, clean, lint free felt.
  • Use a Multi-Material Cutter “scribe & break” method to cut ACRYLITE sheet.

To order the Optium® Acrylic Glazing Sample Kit, please complete and submit the form below.

  • Need 8"x10" samples? Click here to order an Optium Conservator's Sample Kit
  • To request 4"x4" 9mm Optium Museum Display Acrylic Material Board samples, click here
  • To request 4"x4" 6mm Optium Museum Display Acrylic Material Board samples, click here
  • To request shop samples for display case fabrication, click here