Reflection Control®
  • Non-Glare Matte Finish

  • Ideal for minimizing glare and reflection when conservation grade UV protection is not a concern
  • Use on any framing project with up to two mats away from artwork without significant resolution loss
     
  • Etched matte-like finish to minimize glare and allows 89% light transmission  
  • 2.5mm glass substrate

AVAILABLE SIZES

Size

Number of lites per box

11 x 14

47

14 x 18

29

16 x 20

23

18 x 24

17

20 x 24

15

22 x 28

12

24 x 30

10

24 x 36

8

26 x 32

9

30 x 36

7

32 x 40

6

38 x 48

4

40 x 60

2

Handling

     
  • Glass should be handled with care.  To avoid injury cotton gloves should be worn.  
  • Avoid dragging the lites of glass against one another when removing from the box.  
  • Do not slide the lite of glass into place. Lift it up to adjust reposition.

 

Cutting

     
  • Place a slip sheet or a non-slip matboard between the glass and the back of the wall cutter.  
  • Score either side  
  • Keep the glass cutter clean of glass chips by brushing away fragments frequently with a horse hair brush.

 

Cleaning

All of Tru Vue glass products are clean and ready to use. If spot cleaning is needed use the following techniques:

     
  • Place the glass on a clean, non-abrasive surface for cleaning.  
  • Use a clean, soft, lint-free cloth to clean the glass. Tru Vue recommends using a micro-fiber cloth.  
  • Spray a small amount of ammonia-free cleaner onto the cloth. Spraying on the cloth will prevent overspray.  
  • Press the cloth against the glass and clean in round, circular motions.