• Achieves over 97% light transmission to enhance colors, brightness and contrast levels  
• Blocks up to 78% of UV light rays  
• 2.5mm glass substrate

Handling

 
• Glass should be handled with care.  To avoid injury cotton gloves should be worn.  
• Avoid dragging the lites of glass against one another when removing from the box.  
• Do not slide the lite of glass into place. Lift it up to adjust reposition.

Cutting

 
• Place a slip sheet or a non-slip matboard between the glass and the back of the wall cutter.  
• Score either side  
• Keep the glass cutter clean of glass chips by brushing away fragments frequently with a horse hair brush.

Cleaning

All of Tru Vue glass products are clean and ready to use. If spot cleaning is needed use the following techniques:

 
• Place the glass on a clean, non-abrasive surface for cleaning.  
• Use a clean, soft, lint-free cloth to clean the glass. Tru Vue recommends using a micro-fiber cloth.  
• Spray a small amount of ammonia-free cleaner onto the cloth. Spraying on the cloth will prevent overspray.  
• Press the cloth against the glass and clean in round, circular motions.